With Armor 330104-00-20-10-02-05 Bently Nevada | Proximity Probes

Description

Precision Vibration Monitoring Solution

The BentlyNevada 330104-00-20-10-02-05 proximity probe delivers industrial-grade vibration measurement with enhanced 20mm case length for challenging installations. As part of the renowned 3300XL series, this 8mm sensor provides reliable machinery protection in critical applications.

Key Advantages

• Extended 20mm stainless steel housing (AISI 303/304) for deeper mounting requirements
• Military-spec ClickLoc connector (option 02) ensures vibration-resistant cable attachment
• Certified for hazardous areas with ATEX/IECEx approvals (option 05)
• Precision-engineered 7.59Ω ±0.50Ω coil resistance at 25°C

Technical Specifications

• Manufacturer: Bently Nevada (U.S.A.)
• Full Part Number: 330104-00-20-10-02-05
• Configuration Details:
  • 00: Zero unthreaded length
  • 20: 20mm overall case length
  • 10: 1.0 meter integrated cable (3.3 ft)
  • 02: ClickLoc connector without protector
  • 05: CSA + ATEX + IECEx certifications
• Electrical Parameters:
  • Operating Voltage: -17.5Vdc to -26Vdc (±0.5%)
  • Current Draw: 8.5mA typical, 12mA maximum
  • Output Sensitivity: -200mV/mil (7.87mV/μm)
  • Frequency Response: 0.5Hz to 12kHz (-3dB)

Certifications & Compliance

• ATEX: II 1G Ex ia IIC T4 Ga (Zone 0)
• IECEx: Ex ia IIC T4 Ga

Industrial Applications

• Offshore platform compressor condition monitoring
• Pharmaceutical mixer shaft runout detection

Installation Guidelines

For maximum accuracy, maintain target surface roughness between 0.4-1.6μm (16-63μin). The probe requires proper grounding through the connector body. Avoid sharp bends in the cable within 75mm of the probe termination.

Technical Support: Contact our engineering team at [email protected] for application-specific guidance.

More Related Bently Nevada Probes