With Armor 330104-00-05-05-02-00 | Proximity Probes | Bently Nevada

Description

Overview

The BentlyNevada 330104-00-05-05-02-00 represents the gold standard in 8mm proximity probe technology, offering unmatched precision for industrial condition monitoring. Engineered with military-grade components, this probe delivers repeatable measurements within ±0.25μm resolution under extreme operating conditions.

Detailed Technical Specifications

• Mechanical Specifications
  • Thread Engagement: 6.5mm minimum
  • Torque Rating: 6.2N·m maximum
  • Vibration Limit: 50g peak (10Hz to 2kHz)
  • Shock Resistance: 100g for 11ms
• Environmental Ratings
  • IP68 rating when properly installed
  • Chemical Resistance: Withstands Skydrol 500B-4 hydraulic fluid

Model Number Decoding: 330104-00-05-05-02-00

• 330104 – Base part number for 8mm proximity probe
• 00 – Unthreaded length: 00=0mm (no unthreaded portion)
• 05 – Case length: 05=50mm from mounting flange to tip
• 05 – Cable length: 05=0.5 meter (500mm)
• 02 – Connector type: 02=Miniature coaxial ClickLoc (IP67 rated)
• 00 – Agency approval: 00=Standard (no certifications)

Application Case Studies

• Power Generation: Installed on 900MW steam turbine bearings (Siemens SST-9000) achieving 3μm peak-peak measurement stability
• Oil & Gas: 18,000hr MTBF in centrifugal compressor trains (Dresser-Rand HHE)

Installation Guidelines

• Target Surface Finish: 0.4-0.8μm Ra (16-32μin)
• Maximum Runout: 25% of nominal gap
• Recommended Mounting: M10×1 jam nut with 0.15-0.25mm preload

Contact Information

Inquiries: [email protected]

More Related Bently Nevada Probes