Description
Bently Nevada 330903-00-05-10-02-05: Advanced Vibration Sensing Solution
Discover the precision-engineered Bently Nevada 330903-00-05-10-02-05 proximity probe. This industrial sensor delivers exceptional reliability for critical machinery monitoring. Its enhanced design ensures accurate measurements in demanding environments.
Product Identification
- Manufacturer: Bently Nevada
- Series: 3300 NSv Proximity Probes
- Full Part Number: 330903-00-05-10-02-05
- Condition: New & Original (Factory Sealed)
Configuration Breakdown
Our structured numbering system explains each component choice:
- → Base Model: 330903 (M8X1 thread, no armor)
- → Unthreaded Length: 00 (0 mm)
- → Case Length: 05 (50 mm)
- → Cable Length: 10 (1.0 meter / 39 inches)
- → Connector: 02 (ClickLoc, standard cable)
- → Approval: 05 (Multiple Agency Certifications)
Technical Excellence
- Measurement Range: 1.5 mm (60 mils) linear range
- Sensitivity: 7.87 V/mm (±200 mV/mil) output
- Linearity Error: Better than ±0.06 mm (±2.3 mils)
- Frequency Response: 0-10 kHz (±3 dB) with long cables
- Electrical Resistance: 4.2 Ω ± 0.5 Ω per meter
- Temperature Tolerance: -52°C to +177°C operation
- Cable Impedance: 75 Ohm coaxial design
- Minimum Target: 8.9 mm diameter (13 mm ideal)
- Case Material: 304 stainless steel construction
- Tip Material: Chemical-resistant PPS polymer
Installation Specifications
- Optimal Gap Setting: 1.0 mm (40 mils) from target
- Recommended Torque: 5.1 N•m (45 in•lb) for installation
- Maximum Torque: 7.3 N•m (65 in•lb) absolute limit
- Cable Bend Radius: Minimum 25.4 mm (1.0 inch)
- Field Wiring: Use shielded triad cable up to 305 meters
Expert Questions Answered
- What applications suit this probe best?
Perfect for process compressors and turbomachinery vibration monitoring. - How does cable length affect performance?
Longer cables may cause high-frequency signal attenuation above 10kHz. - Can I use this probe with existing systems?
Yes, it works with all 3300 XL NSv Proximitor Sensor monitors. - What maintenance does this probe require?
Regular visual inspection and gap verification ensure optimal performance. - Is calibration required after installation?
Factory calibration remains valid; field calibration is not typically needed.
Copyright © 2025 PLC Pioneer Limited. All rights reserved.
Original Source: https://plc-pioneer.com/
Phone: +86 18150899927
Partners:
World of PLC Limited
PLCDCS HUB Limited
