Description
Bently Nevada 3300 NSv Proximity Probe – Model 330903-00-03-10-01-00
The Bently Nevada 3300 NSv Proximity Probe delivers high-performance vibration and position monitoring for industrial machinery. Its enhanced chemical resistance makes it ideal for demanding process compressor applications. This probe is fully compatible with the 3300 XL NSv Proximitor Sensor and supports long-distance signal transmission up to 305 meters.
Complete Model Suffix Breakdown
- 330903: 3300 NSv Probe, M8X1 thread, without armor
- 00: Unthreaded Length = 0 mm
- 03: Overall Case Length = 30 mm
- 10: Total Cable Length = 1.0 meter (39 inches)
- 01: Connector = Miniature coaxial ClickLoc with protector
- 00: Agency Approval = Not required
Detailed Technical Specifications
- Brand: Bently Nevada
- Model: 3300 NSv
- Part Number: 330903-00-03-10-01-00
- Linear Range: 1.5 mm (60 mils), from 0.25 to 1.75 mm from target
- Recommended Gap Setting: 1.0 mm (40 mils)
- Incremental Scale Factor (Sensitivity): 7.87 V/mm (200 mV/mil) ±12.5%/-20%
- Linearity (Deviation from Best Fit Straight Line): < ±0.06 mm (±2.3 mils)
- Frequency Response: 0 to 10 kHz: +0, -3 dB typical
- DC Resistance (1.0m cable): 4.2 Ω ± 0.5
- Operating Temperature: -52°C to +177°C (-62°F to +351°F)
- Minimum Target Size: 8.9 mm diameter (13 mm recommended)
- Case Material: AISI 304 Stainless Steel
- Tip Material: Polyphenylene Sulfide (PPS)
- Maximum Torque: 0.56 N•m (5 in•lb)
Packaging & Shipping Details
- The product is new and original, delivered in factory-sealed packaging.
- We ship globally via reliable couriers: FedEx, UPS, and DHL.
- Package Includes:
- 1 x 3300 NSv Proximity Probe
- 1 x ClickLoc Connector Protector
- Factory documentation
Frequently Asked Questions (FAQ)
- Q: Is the 3300 NSv probe compatible with older Bently Nevada systems?
A: Yes, it is mechanically and electrically compatible with previous 3300 RAM probe systems. - Q: What is the pressure rating of the probe’s seal?
A: The probe uses a Viton O-ring to seal differential pressure but is not factory pressure-tested. Contact Bently Nevada for custom pressure testing requirements. - Q: Can this probe be used on small-diameter shafts?
A: Yes, for axial measurements on shafts smaller than 13 mm, but the scale factor may change. Reducing the gap will help minimize this effect.
Copyright © 2025 PLC Pioneer Limited. All rights reserved.
Original Source: https://plc-pioneer.com/
Contact Us: +86 18150899927 (WhatsApp)
Partners:
World of PLC Limited
PLCDCS HUB Limited
